The Leakage sensor Leak KNX basic for the KNX building bus system recognizes water, e.g. in case of a pipe breakage. If there is water between the electrodes of the probe, an alarm message will be sent to the KNX bus.Detection of water on the probeAlarm signal sent to the KNX bus with a text message4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bitsConfiguration is made using the KNX software ETS 5MaterialCasing / electrodes: stainless steel A2Installationfor placing on the floorDegree of protectionIP 68Electrode chemical resistanceWaterDimensionsDiameter: approx. 77 mmHeight: approx. 33 mmCable lengthapprox. 140 mm (plus cable grip and plugs)Ambient temperatureOperation -25… 85 °C, storage -40… 125°CWeightapprox. 210 g (without junction box)Operating voltagebus voltagePower on the bus30 mAData outputKNX /- Bus connector terminalCommunication objects54
